page_banner

Afluftere og skumdæmpere

Silikone deformere/silikone anti - skum SD - 3165

Kort beskrivelse:

WynCoat®, Silicone deformer, due to their lower surface tension, silicone defoaming agents have greater defoaming action than organic defoaming agents. Organosilicon compounds (silicone oil) interfere with the surface tension of the gas-liquid interface, resulting in defoaming effect.



Produktdetaljer

Produktmærker

Produktoplysninger

WynCoat® SD-3165 is high concentration emulsion silicone defoamer. For many kinds of water-born systems, it can achieve good anti-foam performance and long-time persistence.  

Nøglefunktioner og fordele

● Produces highly effective and long-lasting foam control

● Readily dispersible in water-based inks and coatings.

● Good compatibility with low tendency to cause defects.

● Very low tendency to affect coating gloss.

Tekniske fysiske egenskaber

Udseende: Mælkeagtig hvid væske

Ikke - flygtigt indhold: ca. 50%

Viskositet (25 ℃): CA.2000 - 4000 CP

Fortyndingsmiddel: Vand

Applikationsmetode

• Det kan tilføjes direkte eller bruge før før - Bland med materiale efter spredning godt.

• During the paint process, we recommend add 50% of total dosage before mill and add another part after mill.

• General speaking, the dosage of the formula in 0.2-0.5% can be effectivity prevent the foam appear. 

Prisprisinstruktioner

Før brug blandes kort med lav forskydning - kræfter.

Tilføjelse kan af enten i slibningen eller under udlejningsproceduren. Tilføjelse som leveret anbefales.

Defoamers lange - termiske effektivitet er afhængig af formuleringen og bør testes i den individuelle formulering (forskellige temperaturer foreslås.)

Pakke- og opbevaringsstabilitet

Fås i 25 kg spand og 200 kg tromme

12 months in closed containers.  

Produktsikkerhed

Product safety information required for safe use is not included. Before handling, read product and safety data sheets and container labels foe safe use, physical and health hazard information. 


  • Tidligere:
  • Næste: